Handbox WB100
Used for approx 30 gigs/rehearsals and in excellent condition.
WB-100- all-tube bass amplifier.
A no-compromise bass head… in a compact package.
The WB-100 has been created for demanding bass players who want to experience the unmistakeable power and authority you can only get from an all-valve head.
Need clean? Warmth? Crunch? All your tonal needs are at your fingertips. The WB-100 will reward you with a heft and a tactile response that will support your band like never before.
Unlike many other tube heads, the WB-100 is compact and easily portable. It’s hand-built here in Poland, without compromise.
With 120w of all-valve power on-tap, the WB-100 can handle any live situation.
DESCRIPTION.
Preamp:
3x ECC83 tubes (3x12AX7)
Power amplifier:
4x6L6 tubes
120W output
Front panel:
James-style tone stack: two-band EQ (Bass, Treble) and a passive Contour filter. No mid control needed!
Bright switch
Drive switch: introduces a crunch, useful for heavier genres
3-position FEEDBACK switch (Funk/Rock/Pop): changes the feedback and frequency response of the power stage, allowing quick tonal changes
DI (XLR) with LINE OUT function, wired to the audio transformer. This provides galvanic separation, like a passive di-box
DI is switchable to Pre/Post, with an optional -6dB pad switch
Rear panel:
2 x speakon connectors (one 4ohm, the other 8 Ohm)
IMPORTANT NOTE: do not connect two speaker cabinets with different impedances at the same time. The sum of the impedance of the cabinets must be adapted to the particular loudspeaker socket)
Dimensions:
WxHxD- 460x185x340(mm) 181x72,8x133,8(In)
WEIGHT: 16kg/35.3lbs)
Used for approx 30 gigs/rehearsals and in excellent condition.
WB-100- all-tube bass amplifier.
A no-compromise bass head… in a compact package.
The WB-100 has been created for demanding bass players who want to experience the unmistakeable power and authority you can only get from an all-valve head.
Need clean? Warmth? Crunch? All your tonal needs are at your fingertips. The WB-100 will reward you with a heft and a tactile response that will support your band like never before.
Unlike many other tube heads, the WB-100 is compact and easily portable. It’s hand-built here in Poland, without compromise.
With 120w of all-valve power on-tap, the WB-100 can handle any live situation.
DESCRIPTION.
Preamp:
3x ECC83 tubes (3x12AX7)
Power amplifier:
4x6L6 tubes
120W output
Front panel:
James-style tone stack: two-band EQ (Bass, Treble) and a passive Contour filter. No mid control needed!
Bright switch
Drive switch: introduces a crunch, useful for heavier genres
3-position FEEDBACK switch (Funk/Rock/Pop): changes the feedback and frequency response of the power stage, allowing quick tonal changes
DI (XLR) with LINE OUT function, wired to the audio transformer. This provides galvanic separation, like a passive di-box
DI is switchable to Pre/Post, with an optional -6dB pad switch
Rear panel:
2 x speakon connectors (one 4ohm, the other 8 Ohm)
IMPORTANT NOTE: do not connect two speaker cabinets with different impedances at the same time. The sum of the impedance of the cabinets must be adapted to the particular loudspeaker socket)
Dimensions:
WxHxD- 460x185x340(mm) 181x72,8x133,8(In)
WEIGHT: 16kg/35.3lbs)
Used for approx 30 gigs/rehearsals and in excellent condition.
WB-100- all-tube bass amplifier.
A no-compromise bass head… in a compact package.
The WB-100 has been created for demanding bass players who want to experience the unmistakeable power and authority you can only get from an all-valve head.
Need clean? Warmth? Crunch? All your tonal needs are at your fingertips. The WB-100 will reward you with a heft and a tactile response that will support your band like never before.
Unlike many other tube heads, the WB-100 is compact and easily portable. It’s hand-built here in Poland, without compromise.
With 120w of all-valve power on-tap, the WB-100 can handle any live situation.
DESCRIPTION.
Preamp:
3x ECC83 tubes (3x12AX7)
Power amplifier:
4x6L6 tubes
120W output
Front panel:
James-style tone stack: two-band EQ (Bass, Treble) and a passive Contour filter. No mid control needed!
Bright switch
Drive switch: introduces a crunch, useful for heavier genres
3-position FEEDBACK switch (Funk/Rock/Pop): changes the feedback and frequency response of the power stage, allowing quick tonal changes
DI (XLR) with LINE OUT function, wired to the audio transformer. This provides galvanic separation, like a passive di-box
DI is switchable to Pre/Post, with an optional -6dB pad switch
Rear panel:
2 x speakon connectors (one 4ohm, the other 8 Ohm)
IMPORTANT NOTE: do not connect two speaker cabinets with different impedances at the same time. The sum of the impedance of the cabinets must be adapted to the particular loudspeaker socket)
Dimensions:
WxHxD- 460x185x340(mm) 181x72,8x133,8(In)
WEIGHT: 16kg/35.3lbs)